Go Down

Topic: Wireless Router Home Automation (Read 1 time) previous topic - next topic


Oct 14, 2012, 06:06 pm Last Edit: Oct 27, 2012, 10:18 am by SM.Ching Reason: 1
This project use an Arduino connected to the TP-LINK TL-WR1043ND and allow it to control home appliances from network.
See my website for more details: http://ediy.com.my/index.php/projects/item/42-wireless-router-home-automation

As shown in figure below is the startup screen from browser.

When program start, it query Arduino and display image on screen according to the status of Arduino.
Click on image1 to image8 to toggle Arduino output.
Click on image9 to query Arduino

I'm using LED to test the  functionality.

After everything is tested without problem, the 8 channel relay box is use to handle large loads. http://ediy.com.my/index.php/projects/item/43-8-channel-relay-box
Electronics and computer projects


Very nicely executed! From the clean and well organized layout and installation in the electrical enclosure to the beautifully crafted web interface.


Go Up

Quick Reply

With Quick-Reply you can write a post when viewing a topic without loading a new page. You can still use bulletin board code and smileys as you would in a normal post.

Warning: this topic has not been posted in for at least 120 days.
Unless you're sure you want to reply, please consider starting a new topic.

Note: this post will not display until it's been approved by a moderator.

shortcuts: alt+s submit/post or alt+p preview