Pages: [1] 2 3 ... 8   Go Down
Author Topic: Multidisplay, a Open Source inCar Display, Logger  (Read 48929 times)
0 Members and 4 Guests are viewing this topic.
Austria
Offline Offline
Sr. Member
****
Karma: 3
Posts: 260
Arduino rocks
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

Hello,

like the mpgduino, i want to make a display for the car what displays health data from the engine.

Planned are: Lambda, Exhausttemperatures, Intakepressure, and some more...

Currently it can show Lambda, but only on my Desk  smiley-grin

The Code is here: http://code.google.com/p/multidisplay/

and everything about the Powersupply: http://code.google.com/p/multidisplay/wiki/Powersupply

The Prototype:


And a Example Display:


Planned is to have it installed next winter into my car, hope that works  8-)

And here´s the Car-Forum where some Other People also follow this: http://www.vr6forum.eu/phpBB3/viewtopic.php?f=14&t=7684

Here is the old version from my lambda meter: http://www.designer2k2.at/index.php?option=com_content&view=article&id=14:vr6-lambdaanzeige&catid=7:auto&Itemid=28

[media]http://www.youtube.com/watch?v=Yt38Tty-ruM[/media]
what got killed by noisy voltage supply...

designer2k2
« Last Edit: April 17, 2009, 02:33:31 pm by designer2k2 » Logged


0
Offline Offline
Jr. Member
**
Karma: 0
Posts: 56
Arduino rocks
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

very cool.  Where did you get the blue box?
Logged

Atascadero, CA
Offline Offline
Sr. Member
****
Karma: 2
Posts: 468
Arduino addict
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

What does the Lambda value indicate?
Logged

What about elevensies? Luncheon? Afternoon tea? Dinner? Supper?

0
Offline Offline
Full Member
***
Karma: 0
Posts: 126
Arduino rocks
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

I had to look it up,  I was curious , too.

Quote
Oxygen sensor - Wikipedia, the free encyclopedia
Automotive...|Diving...|Scientific...|See alsoAn oxygen sensor, or lambda sensor, is an electronic device that measures the proportion of oxygen (O2) in the gas or liquid being analyzed. It was developed by Robert Bosch GmbH during the late 1960s under supervision by Dr. Günter Bauman. The original sensing element...
en.wikipedia.org/wiki/Oxygen_sensor - 60k - Cached.
Logged

Austria
Offline Offline
Sr. Member
****
Karma: 3
Posts: 260
Arduino rocks
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

the blue box: http://shop.conrad.at/ce/de/product/531390/
Datasheet from it: http://www2.produktinfo.conrad.com/datenblaetter/525000-549999/531390-da-01-en-1591XX_GEHAEUSE_BLAU_TRANSP_121X66X37MM.pdf

About Lambda:

when having a tuned engine the Lambda value is a great "health" indicator.

it shows how rich or lean the engine runs, during normal cruise it should be quite normal, but when hitting it hard it must always be slightly rich.
If you run lean (fuel system defect) during full load the exhaust temperatur will skyrocket and your piston/valves can melt away...

Thats way im also having exhaust temp probes installed:


and later the arduino will look up this this 2 Type K thermocouples.

have already some ideas about arduino with type k thermocouples: http://www.designer2k2.at/index.php?option=com_content&view=article&id=19:thermoelement-typ-k-an-arduino&catid=13:arduino&Itemid=40
its german but the google translation to english is quite good!
http://translate.google.at/translate?u=http%3A%2F%2Fwww.designer2k2.at%2Findex.php%3Foption%3Dcom_content%26view%3Darticle%26id%3D19%3Athermoelement-typ-k-an-arduino%26catid%3D13%3Aarduino%26Itemid%3D40&sl=de&tl=en&hl=de&ie=UTF-8

designer2k2
Logged


Rural Arizona
Offline Offline
Edison Member
*
Karma: 7
Posts: 1711
Incorrigible tinkerer
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

So, how good is the air/fuel ratio control of your desk?   ;D
Logged

Austria
Offline Offline
Sr. Member
****
Karma: 3
Posts: 260
Arduino rocks
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

after 1 week testing, the powersupply failed...  :-[

it heats up to 75°C at 20°C ambient, in a car thats no good   :-X

The "demo":

its a 33Ohm 5Wats resistor, simulating a little bit more load than only the 3 led´s
With a thermocouple measuring the temp of the heatsink.


and that with a quite big heatsink:


Problem is the 7805, it must kill to much power. So a DC/DC converter will take its place:

http://www.recom-international.de/pdf/Innoline-2008/R-78xx-0.5.pdf

This thing gives 5V at a 0,5A without Heatsink, with an huge input range (6.5V - 34V)

And a nice addon, its pin compatible with the 7805  smiley

So now parts are ordered, and the testing continues  8-)

Goal is to get a decent source to supply the whole thing inside a car  smiley
« Last Edit: April 24, 2009, 09:42:57 am by designer2k2 » Logged


Atascadero, CA
Offline Offline
Sr. Member
****
Karma: 2
Posts: 468
Arduino addict
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

Here's another one of those type of pin-compatible switching regs:

http://www.dimensionengineering.com/DE-SW050.htm

Not sure they're any better or worse, but at least you have two possible sources now.  smiley-wink
Logged

What about elevensies? Luncheon? Afternoon tea? Dinner? Supper?

Austria
Offline Offline
Sr. Member
****
Karma: 3
Posts: 260
Arduino rocks
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

from the basic specs it looks nice (5V,1A) costs also the same, size is about the same (for the 1A Type)

problem is its not available from my "standart" sources (Conrad, RS-components, Segor)...

but if somebody in the US wants to build that they can just take this one, they are nearly identical from the specs  smiley
Logged


0
Offline Offline
Newbie
*
Karma: 0
Posts: 1
Arduino rocks
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

I'm thinking about using your idea in my car for a summer project.  I'm american, unfortunately, I can read grade school german but the forums you linked are a little much for me.  I appreciate you writing this in english, as I can tell you're german.

I want to do an in dash LCD, with lambda among other things.  Hopefully, you will keep me updated on your progress.  I will be installing this into a Subaru WRX STI.

Is there anyway you could translate your lambdaanzeige page for me?
« Last Edit: May 02, 2009, 06:34:59 pm by basic360 » Logged

Austria
Offline Offline
Sr. Member
****
Karma: 3
Posts: 260
Arduino rocks
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

hello basic260,

im austrian, hope im not writing too bad  smiley-wink

check out http://www.autospeed.com/cms/A_110625/article.html
that was my inspiration  for the lambda display smiley


i will keep this for shure updatet, just now im on business travel, but parts ar ordered and within the next week the first prototype should find its way into my car  smiley-grin
Logged


Austria
Offline Offline
Sr. Member
****
Karma: 3
Posts: 260
Arduino rocks
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

the DC/DC converter is mounted, and the temperature dropped to 28°C, so only 8°C above ambient  smiley-grin

and ive got my 20x2 LCD (Displaytech 202A-CC-BC-3LP), what should be easier to mount in the car:




Next step is to get it hopefully next week into the car for a testrun, and then start with the RPM Input.

For RPM i will use a LM2907 (See page 10 for Example Circuit)

Its basically a Frequency / Voltage converter, so i will read it in on a Analog In pin.

But now i have to get a mothers day gift  :-/
Logged


Austria
Offline Offline
Sr. Member
****
Karma: 3
Posts: 260
Arduino rocks
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

its getting close to put it in my car  smiley

current code: http://code.google.com/p/multidisplay/source/browse/#svn/trunk/work_designer2k2_02/work_designer2k2_02

looks a bit like this:


im using a MCP3208 as ADW, so i have enough pins for some buttons...

besides the LCD its streaming all 8 ADW pins as csv over the serial interface, including a "milis" timestamp.
So it can be used for logging in combination with a notebook  smiley

i still need to get the RPM measurement running, not so easy as i thought...  :-?
Logged


Glassport,Pa@ USA
Offline Offline
Full Member
***
Karma: 0
Posts: 150
shoop teh whoop!
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

how exactly are you powering everything?
i can proboly tell your going to say car battery right?
well, heres a sugesston.
buy another car battery, use a resister to get it to 5 volts, and then, plug everything in ;D
Logged

[ch9618][ch9618][ch9618][ch9618][ch9618][ch9618][ch9618][ch9618][ch9618][ch9618][ch9618][ch9618][ch9618][ch9618][ch9618][ch9618][ch9618]

Austria
Offline Offline
Sr. Member
****
Karma: 3
Posts: 260
Arduino rocks
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset



now with custom characters, and a baragraph display implemented with some custom characters:

[media]http://www.youtube.com/watch?v=N-FMSYjBUfs[/media]

its getting close to put it in my car  smiley
Logged


Pages: [1] 2 3 ... 8   Go Up
Jump to:  

Powered by SMF 1.1.19 | SMF © 2013, Simple Machines