Go Down

Topic: Loquino - the Loquacious Arduino (Read 2507 times) previous topic - next topic

kiwimew

Early last year I agreed to exchange something hand-made with a couple of friends.  One is an English teacher so I decided to implement an idea I'd had in the back of my mind for a while: a small box with a large vocabulary, the "Loquino".  Its sole purpose is to display a sequence of random words on a small LCD.  The words are included in the sketch (PROGMEM), so with less than 32k available I had to employ some "heroic" coding techniques
  • Huffman coding - To compress a list of about 1800 real words taken (with permission) from the Grandiloquent Dictionary (http://www.islandnet.com/~egbird/dict/dict.htm).

  • Markov chaining - To generate random pseudo-words which look like real English words (have the same statistical properties).


I liked the idea of the box being self contained and optionally able to run off batteries, so I spent some time working on using an LDR to put the ATmega to sleep when the enviroment went dark, and wake when it became light again.  I found it difficult to get consistent results and didn't really have time to find out how long batteries would last, because the two Loquino's I made, I sent to my friends. :(

My flickr set http://www.flickr.com/photos/funnypolynomial/sets/72157629076673753/ has pictures of the build and videos.  The sketch is available from my site http://www.funnypolynomial.com/software/arduino/loquino.html.

This is the main circuit board.  The socket is for the ATmega, the LCD mates with the strip along the bottom (and covers the ATmega), top-right is the LDR:

Some Time Later by funnypolynomial, on Flickr

And the second, lower, board with power via USB B, a pot for the LCD contrast and two buttons to configure the box:

Lower Board by funnypolynomial, on Flickr

This is the first one, fully assembled and showing a pseudo-word, "spoone":

Power Side by funnypolynomial, on Flickr

This is the second one, fully assembled and showing a real word, "psychomancy" (Divination by talking to the dead):

Together (Top + Base) by funnypolynomial, on Flickr

And here's a video of it running:
http://www.youtube.com/watch?v=9b4OfhSSNDc
You'll see the splash screen then:
shurocracy (A government based on consensus)
orneflass? (? denotes a pseudo-word)
psychomancy (Divination by talking to the dead)
rindiable?
halieutic (Of or about fishing)
croodle (Too coo like a dove)
antive?
meiffect?
zizany (A dangerous or toxic weed)
rette?


I used Jiffy cases, http://www.jaycar.co.nz/productView.asp?ID=HB6004.  I rather like the translucent effect (and of course it's important for the LDR to work!):

Splash by funnypolynomial, on Flickr

This is my second Ardiuno project (my first was the KENBAK-uino, http://arduino.cc/forum/index.php/topic,73279.0.html).  This turned out to be about as complex and with the added insanity of a deadline (we agreed to exchange the items by the end of 2010, and I started late) and the need to create two!

// TODO: sig

Go Up