Pages: [1]   Go Down
Author Topic: Arduino programmer  (Read 990 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline
Karma: 0
Posts: 3
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset


I am writing on this forum hoping someone has a solution to my problem.
I will try to explain here below, briefly and, I hope, clearly, the project that I have to realize and the problem.

I need to create a system that detect atmospheric data by sensors and transmit them via GPRS / GSM.
To do this, I "assembled" an Arduino Uno and a GPRS / GSM shield model "Hilo Sagem."
At the moment, the Arduino is programmed to receive and convert the data received by the sensors into data packages for the GPRS / GSM Shield, and GPRS / GSM shield is programmed to send data packagets.

The GPRS / GSM shield fails to send multiple packages in series; after sending the first package, the GPRS / GSM shield enters in stand-by mode (stand-by mode is required for energy saving) and it cannot longer be reactivated to send the next package.

I am looking for a programmer who is familiar with the "Arduino world" and that can:
- correct the software (software carried out with “AT command”) and provide "advices" for future issues
- carry out a proper software from zero also with other components.

Obviously these activities will be rewarded (compensation to be agreed).

Please contact me to

Thanks in advance

Gosport, UK
Offline Offline
Faraday Member
Karma: 21
Posts: 3113
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Please don't cross-post. This should be in Gigs and Collaborations -,26.0.html.

Global Moderator
Melbourne, Australia
Offline Offline
Brattain Member
Karma: 511
Posts: 19306
Lua rocks!
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Thread moved. Please don't cross-post like that. Four copies is three too many.

Please post technical questions on the forum - not to me by personal message. Thanks a lot.

Pages: [1]   Go Up
Jump to: