next topic »

[on:]

http://www.circuitsathome.com/mcu/usb-host-shield-library-version-2-0-released  . Hub support, HID, asyncs. PTP, MSD, ADK to follow soon.

Enjoy!

/felis

[Reply #1 on:]

Thanks,

[Reply #2 on:]

You are welcome :-)

Just posted an article about cell phone support -> http://www.circuitsathome.com/mcu/programming/interfacing-arduino-to-a-cellular-phone . GSM on the cheap.

[Reply #3 on:]

http://www.circuitsathome.com/mcu/usb-host-shield-library-version-2-0-released

In this article you refer to Konstantin Chizhov's avr pin templates but the link

https://github.com/KonstantinChizhov/AvrProjects

has many projects.

It sounds like a really interesting idea. Googling hasn't helped me.
Can you point me to the original post?

Iain

[Reply #4 on:]

http://easyelectronics.ru/rabota-s-portami-vvoda-vyvoda-mikrokontrollerov-na-si.html

[Reply #5 on:]

Thanks :-))
I didn't realise it would be in Russian, but perhaps I should have.

Did you just read the code or do you have an English version of the article?

Iain

[Reply #6 on:]

Did you just read the code or do you have an English version of the article?

I read the article - Russian is my mother tongue.

In order to understand this code, you may also want to read this book -> http://www.amazon.com/exec/obidos/ASIN/0201704315/modecdesi-20  Be warned - this stuff is not easy.

[Reply #7 on:]

Interfacing GPS via USB -> http://www.circuitsathome.com/mcu/communicating-to-gps-receiver-using-usb-host-shield

Enjoy!

[Reply #8 on:]

Google ADK -> http://www.circuitsathome.com/mcu/google-open-accessory-interface-for-usb-host-shield-library-2-0-released

[Reply #9 on:]

Digital Camera Control AKA PTP -> http://www.circuitsathome.com/camera-control/ptp-support-for-usb-host-shield-library-2-0-released

[Reply #10 on:]

Human Input Devices AKA HID (keyboards, mice, joysticks) -> https://www.circuitsathome.com/mcu/hid-support-for-usb-host-shield-library-2-0-released

[Reply #11 on:]

It is becoming an impressive list!   Well done

[Reply #12 on:]

When you downlaod and use this library Arduino IDE will not accept it . I found I had to rename the library. Kept getting the error that only normal ascii and no spaces etc message

[Reply #13 on:]

This is not specific to my library.

[Reply #14 on:]

This is not specific to my library.

Maybe not, but you could make it easier by not using invalid characters in the name of your library. In the zip file name, fine. In the folder name, no.