Loading...
« previous topic   next topic »
Pages: [1]   Go Down
Author Topic: Arduino UNO Rev3 Windows 7 Unknown Device - SOLVED! (for me at least)  (Read 2739 times)
0 Members and 1 Guest are viewing this topic.
rbwilliams
Offline Offline
Newbie
*
Karma: 0
Posts: 1
View Profile
« on: December 28, 2011, 03:00:51 pm »
 Bigger Bigger Smaller Smaller Reset Reset
This first statement in this thread explained my problem exactly: http://forums.adafruit.com/viewtopic.php?f=21&t=24732

I could never get a driver to be recognized. I then tried something else. I documented it here in screenshots:

http://riverembedded.hackhut.com/2011/12/28/my-arduino-uno-rev-3-and-windows-7-64-bit-installation-unknown-device/

I hope it helps somebody!
Logged

dshay
Minnesota, USA
Offline Offline
Jr. Member
**
Karma: 0
Posts: 66
Arduino rocks
View Profile
« Reply #1 on: December 29, 2011, 10:25:49 am »
 Bigger Bigger Smaller Smaller Reset Reset
Thank you!

I've been struggling with this for two days.

I followed the instructions up until:

Choose Arduino LLC (I didn't have that option listed)

However, if you leave the option > Standard Port Types

and select

Have Disc

and point to the recommended Arduino Uno.inf file it works.

This is for problems with 64bit Windows 7 installation.

Thanks again!
Logged

Pages: [1]   Go Up
Print
« previous topic   next topic »
 
Jump to: