Go Down

Topic: SparkFun Li-Po Shield: What Resistor To Charge At 500mAh? (Read 1 time) previous topic - next topic



500 mAh is a capacity, not a charge rate.  The charge rate is in mA.  I think a "1C" rate is the current it would take to reach capacity in 1 hour.  In your case: 500 mA (0.5 A).

The schematic shows that the charge current is 1000/R and the built-in R is 10K.  This makes the default current 100 mA (0.1A).  The schematic also says that to get the maximum allowable charge current add a 2.5K resistor.  In the product description it says that the maximum allowed charge current is 500 mA (0.5 A).

So the answer is 2.5k.
Send Bitcoin tips to: 1G2qoGwMRXx8az71DVP1E81jShxtbSh5Hp


Mrs Drew
http://www.uk-pcb.co.uk - UK PCB Fab Company
I will design & code for you, but I will also charge you (PM me)
If you don't like my answers, realize : I'm not being cheeky, I'm Just trying to prompt you to use your own brain/google etc.

Go Up