Hello,
I am trying to send two potentiometer values connected to two arduinos to a laptop.
So i am using Xbee 802.15.4 (Series 1) modules for the purpose.
My setup is as follows:
Transmitter:
ArduinoTx (Pin3 NewSoftSerial) ===> XbeeDin //Using NewSoftSerial to avoid conflicts with USB as i am not using the Xbee Shield
Arduino3V3 ===> XbeeVDD
ArduinoGND ===> XbeeGND
Arduino Powered using Laptop's USB port
Laptop:
Xbee connected to FT232 Xbee Adapter Board
My Xbee Configurations:
ArduinoXBEE
(XB24, 802.15.4, 10E8)
ID = 9898
DH = 0
DL = 1
MY = 2
BD = 5 (38400)LaptopXBEE
(XB24, 802.15.4, 10E8)
ID = 9898
DH = 0
DL = 0
MY = 1
CE = 1 (Cordinator Enable)
BD = 5 (38400)
It worked for the first time. But when i powered off both arduino and laptop's xbee, it does not work.
I tested the same setup with my other Series 2 modules and it works.
Is my above Xbee configuration correct ?
Any help will be appreciated.