I want to build a datalogger project and am going to use Jermey Blum's tutorial on datalogging as reference. My question is wether the product in this link Checking requirements... will work with his tutorial. Likewise I also want to know if all SD card modules can be connected using same method or does every one have a different method (Both hardware and software wise) .
if the adapter (which is out of stock btw) uses SPI interface and has a 5 to 3.3 volt level shifter then they will work the same with the SD library or other typical arduino configurations
It does have 5 to 3.3v shifter and the description says it brings out all the SPI pins. Thanks.