kf2qd:
Those Pitman motors are probably 1/8inch.There are standard motor shaft sizes, There problem is, there are many standards... Metric sizes will probably be either a whole or half millimeter and under 1/8 inch they will probably be in 1/32 inch increments (or 1/64) over 1/8 they will generally go by 1/8ths with a couple 1/6ths thrown in (we seem to like 7/16 and 9/16)
Ah, sounds messy 
. Sounds like you just have to adapt where you can't get the exact right size. Thanks for the help.