I am looking for some help in building a clock. i have an unused 16x2 line LCD display in my car and thought i would make use of it by turning it into a clock, i have so far managed to get my arduino to display text and a count in seccons but have no idea how to go about making a clock so i was wondering if anyone would be able to help me. I am an electronics engineer so i have a very good understanding of teh hardware side of things but not on teh software/programing side of it. my setup is as follows.
Arduino nano v3.0, 16x2 character LCD display and DS1307 Real-time clock condule, I have wired as follows to the Arduino
LCD RS pin to digital pin 12
LCD Enable pin to digital pin 11
LCD D4 pin to digital pin 5
LCD D5 pin to digital pin 4
LCD D6 pin to digital pin 3
LCD D7 pin to digital pin 2
Plus power and ground/backlight power and ground to the LCD
DS1307 SCL pin to pin A5
DS1307 SDA pin to pin A4
Any help anyone would be able to give me would be gratefuly received. i would like top display date and time on the display and have attached an immage of how i would liuke it to be displayed.
thanks in advance
Phil.