Go Down

Topic: IDE support for Ai-Thinker A9G GPRS + GPS board (Read 2499 times) previous topic - next topic

zeemankay

Jan 22, 2018, 05:47 pm Last Edit: Jan 22, 2018, 05:52 pm by zeemankay
Hi,

Anybody have IDE support for Ai-Thinker A9G board?
http://wiki.ai-thinker.com/gprs/a9g/boards

They already provide C SDK but not sure how to integrate to Arduino IDE.
https://github.com/Ai-Thinker-Open/GPRS_C_SDK

Any guide to create the hardware driver to connect to IDE is much appreciated.


Cheers...

pert

Here's the definitive reference:
https://github.com/arduino/Arduino/wiki/Arduino-IDE-1.5-3rd-party-Hardware-specification

I recommend you also use other hardware packages as a guide.

You might also find this useful if you want to add support for Boards Manager installation:
https://github.com/arduino/Arduino/wiki/Arduino-IDE-1.6.x-package_index.json-format-specification

As you work through the process feel free to come back here with specific questions.

mrrcomp

Hi
I'm about to get the a9g module . Did you get this working in the ide?  Any info / code you have on integrating it with arduino that you can share will be greatly appreciated.

Regards

Meir

jumpjack

any news?
I purchased a dev board with SD-Card but without documentation, any tip?
https://www.ebay.de/itm/AI-Thinker-GPS-BDS-GPRS-A9G-Board-32Mbit-C-SDK-GPIO-UART-ADC-I2C-SPI-MQTT-TFCard-/282891177801

Go Up