Arduino UNO Pinout Diagram

I'm working on a new improved version:

I'll make it available soon.

1 Like

This is a tutorial for use the sheet size 1:1

laminate the sheet and punch

glue the bolts...

the final result...

with Arduino!

THAT was an clever idea!

Nice use of graphics. What did you use to create this?

Nice, especially the laminated printout and mounted arduino. Can you indulge a request to change the width of the atmega328 chip to 0.3" wide instead of about twice that width? :slight_smile: would seem nice to mount an atmega328 to a laminated printout as well.

kf2qd:
Nice use of graphics. What did you use to create this?

Illustrator and a lot of patience... :smiley:
I'm also working on diagrams with basic connections for Arduino Uno at this link.

liudr:
Nice, especially the laminated printout and mounted arduino. Can you indulge a request to change the width of the atmega328 chip to 0.3" wide instead of about twice that width? :slight_smile: would seem nice to mount an atmega328 to a laminated printout as well.

Ok,
The time to do it.

liudr:
...would seem nice to mount an atmega328 to a laminated printout as well.

Did you mean like this?

The file is on first post. :wink:

Excelllent work! This will be very handy!

Thanks, very handy :slight_smile:

Need a '1284P version now ...

nice job!

pighixxx:

kf2qd:
Nice use of graphics. What did you use to create this?

Illustrator and a lot of patience... :smiley:
I'm also working on diagrams with basic connections for Arduino Uno at this link.

Wow, that is amazing work, should be very handy for beginners.

Thanks. My kit is en-route and these will come in handy.

Thanks to all!
I'm working now on Arduino MEGA 2560 pinout :wink:
Stay tuned.

Wow! Awesome job and THANKS! - Scotty

The Arduino MEGA version is on line

http://arduino.cc/forum/index.php/topic,146511.0.html

Bye

The AtMega1284p version is out. :sweat_smile:

Files on first post.

and the ATMega644p

and it's all for today ... XD

Couple comments -
Missing INT2 on PB2

Arduino pinout- can you add the alternate Bobuino Pinout? I think its more useful

// ATMEL ATMEGA1284P on Bobuino
//
//                       +---\/---+
//           (D 4) PB0 1 |        | 40 PA0 (D 21) AI 7
//           (D 5) PB1 2 |        | 39 PA1 (D 20) AI 6
//      INT2 (D 6) PB2 3 |        | 38 PA2 (D 19) AI 5
//       PWM (D 7) PB3 4 |        | 37 PA3 (D 18) AI 4
//   PWM/SS (D 10) PB4 5 |        | 36 PA4 (D 17) AI 3
//     MOSI (D 11) PB5 6 |        | 35 PA5 (D 16) AI 2
// PWM/MISO (D 12) PB6 7 |        | 34 PA6 (D 15) AI 1
//  PWM/SCK (D 13) PB7 8 |        | 33 PA7 (D 14) AI 0
//                 RST 9 |        | 32 AREF
//                VCC 10 |        | 31 GND 
//                GND 11 |        | 30 AVCC
//              XTAL2 12 |        | 29 PC7 (D 29) 
//              XTAL1 13 |        | 28 PC6 (D 28) 
//      RX0 (D 0) PD0 14 |        | 27 PC5 (D 27) TDI
//      TX0 (D 1) PD1 15 |        | 26 PC4 (D 26) TDO
// INT0 RX1 (D 2) PD2 16 |        | 25 PC3 (D 25) TMS
// INT1 TX1 (D 3) PD3 17 |        | 24 PC2 (D 24) TCK
//     PWM (D 30) PD4 18 |        | 23 PC1 (D 23) SDA
//      PWM (D 8) PD5 19 |        | 22 PC0 (D 22) SCL
//      PWM (D 9) PD6 20 |        | 21 PD7 (D 31) PWM
//                       +--------+
//