Hi all. I plan to use a PCB transformer in my next project (240v to 9v). I'm wondering if any additional components will be required - I know I will need a bridge rectifier to convert the AC output and I'm also putting a fuse on the o/p, but is there anything else I should add, such as capacitors? T…

Using a PCB transformer

system July 3, 2012, 7:38pm 7

dtokez:
Hi all. I plan to use a PCB transformer in my next project (240v to 9v). ... I'm also putting a fuse on the o/p

Rule of thumb: Fuse on the output is optional. Fuse on the input is not.

Topic		Replies	Views
Power supplyi to Arduino with transformer General Electronics	27	1778	January 15, 2023
Building a power supply for a Nano Project Guidance	12	2096	May 5, 2021
Supplying power to Arduino with transformer? Troubleshooting	9	7493	May 6, 2021
Power for Nano project Project Guidance	2	344	May 5, 2021
Components to create a power supply from 230V AC Project Guidance	12	1724	May 5, 2021