The I2C diagram, as simple as it is, can easily be misinterpreted. This is a bit hard to describe without a drawing but here goes. On the SCL and SDA lines the horizontal lines to the right of the resistors should end at the bottom of the vertical lines going to Vcc. Or, better yet, the resistors themselves should just replace the vertical lines. As it is drawn now you have three Vcc lines above the ground on the right side of the drawing.
One thing I miss is the picture you put on top
[edit]Thursday 29
Well, for the moment, I am using pictures extracted from the pdf. It will be easy to change them later[/edit]
Hi,
It's so good I'd thought grab a copy via .pdf. What version of distiller did you use ?
I've got Adobe 7 which thinks the file is corrupt. :-(}
aka ged
I've released v.02c with some more changes, and this time I've used cutePDF instead of acrobat distiller. (Incidentally the image quality worked much better with no frigging around). Hopefully this works for you.
Pracas: Sure! Please feel free to hand them out or do whatever you like with them. I got all the info under C.C. license, so go for it.