Need urgent help. " To control 2 servo independently us."

Using Arduino Project Guidance
1

I want to control servo motor by turning the degree I want. As a example,if i type 130, the motor will rotate to 130?. And then the next i type 90, motor2 move to 90?. Can someone give me the coding? The place i type the degree hopefully is visual basic interface. Need help for the coding.

2

Which is it?

Can someone give me the coding?

Or

Need help for the coding.

The latter is usually possible by posting what coding you have tried and ask for help with it. The former is probably not going to happen.

3

Also ...

Your description of what you want to do is not clear enough.

How is the Arduino supposed to know which servo to move?

...R

4

Servo test code for individually controlling a number of servos.

//zoomkat 11-22-12 simple delimited ',' string parse 
//from serial port input (via serial monitor)
//and print result out serial port
//multi servos added 

String readString;
#include <Servo.h> 
Servo myservoa, myservob, myservoc, myservod;  // create servo object to control a servo 

void setup() {
  Serial.begin(9600);

  //myservoa.writeMicroseconds(1500); //set initial servo position if desired

  myservoa.attach(6);  //the pin for the servoa control
  myservob.attach(7);  //the pin for the servob control
  myservoc.attach(8);  //the pin for the servoc control
  myservod.attach(9);  //the pin for the servod control 
  Serial.println("multi-servo-delimit-test-dual-input-11-22-12"); // so I can keep track of what is loaded
}

void loop() {

  //expect single strings like 700a, or 1500c, or 2000d,
  //or like 30c, or 90a, or 180d,
  //or combined like 30c,180b,70a,120d,

  if (Serial.available())  {
    char c = Serial.read();  //gets one byte from serial buffer
    if (c == ',') {
      if (readString.length() >1) {
        Serial.println(readString); //prints string to serial port out

        int n = readString.toInt();  //convert readString into a number

        // auto select appropriate value, copied from someone elses code.
        if(n >= 500)
        {
          Serial.print("writing Microseconds: ");
          Serial.println(n);
          if(readString.indexOf('a') >0) myservoa.writeMicroseconds(n);
          if(readString.indexOf('b') >0) myservob.writeMicroseconds(n);
          if(readString.indexOf('c') >0) myservoc.writeMicroseconds(n);
          if(readString.indexOf('d') >0) myservod.writeMicroseconds(n);
        }
        else
        {   
          Serial.print("writing Angle: ");
          Serial.println(n);
          if(readString.indexOf('a') >0) myservoa.write(n);
          if(readString.indexOf('b') >0) myservob.write(n);
          if(readString.indexOf('c') >0) myservoc.write(n);
          if(readString.indexOf('d') >0) myservod.write(n);
        }
         readString=""; //clears variable for new input
      }
    }  
    else {     
      readString += c; //makes the string readString
    }
  }
}