greetings all,
i recently received an arduino due; i'm running debian squeeze.
all upload attempts fail.
upon plugging in the due via programming port, dmesg gives:
[ 2509.432034] usb 5-1: new full speed USB device using uhci_hcd and address 5
[ 2509.629816] usb 5-1: New USB device found, idVendor=2341, idProduct=003d
[ 2509.629822] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=220
[ 2509.629827] usb 5-1: Product: Arduino Due Prog. Port
[ 2509.629830] usb 5-1: Manufacturer: Arduino (www.arduino.cc)
[ 2509.629833] usb 5-1: SerialNumber: A4139363931351316291
[ 2509.629987] usb 5-1: configuration #1 chosen from 1 choice
[ 2509.632923] cdc_acm 5-1:1.0: ttyACM0: USB ACM device
ls -al /dev/ttyACM* returns:
crw-rw-rw- 1 root dialout 166, 0 Feb 12 06:58 /dev/ttyACM0
i'm using the latest IDE (1.5.2 linux-32) w/support for the due from the main site.
in the ide, i am able to select '/dev/ttyACM0' under Tools > Serial Port
and the board under Tools > Board > Arduino Due programming port.
everytime i attempt to upload a basic/empty sketch, i receive:
Binary sketch size: 9,624 bytes (of a 524,288 byte maximum) - 1% used
No device found on ttyACM0
whether i run the ide as root or normal user.
i've combed g**gle to no avail. none of the suggestions i've read in the 'duino forums seems to help or present the same problem.
ps - i attempted to upload under windows- only once though. the drivers install, but the ide closes immediately upon opening with a sound notification but no error window or message appears. i only tried once though and haven't since the initial install (i.e., no reboot).
any help or advice would be grandly appreciated.
thanks