Hi all I designed a bare-bone Arduino Nano which only has what I need for my project. I was able to burn a bootloader to it and also, when connected to the PC, it is recognized as a COM port. But when I try to upload a sketch, I get the famous "stk500_getsync() not in sync resp=0x00" message. I d…

Can't upload a sketch from the IDE to my bare-bone Arduino Nano

system January 19, 2013, 6:06am 13

The code didn't work on my board. im having the same problem.

Topic		Replies	Views
[Solved] Arduino Nano v3, stk500_getsync(): not in sync: resp=0x00 Avrdude, stk500, Bootloader issues	14	46973	May 6, 2021
Uploading sketch via serial port Avrdude, stk500, Bootloader issues	5	421	March 3, 2024
Uploading problem with cloned NANO IDE 1.x	4	453	May 5, 2021
Can't upload sketch to arduino nano IDE 1.x	15	2263	December 17, 2021
Unable to upload sketch to Adrinuo Nano Avrdude, stk500, Bootloader issues	12	2869	May 6, 2021