Hint: If you look at post #2 and there is no link to the *.exe file, you have to create a forum account and log in. An advise in post #2 would be nice.
flyboy_____:
Soranne I have been following this project and now I want to program one PIC12F683.
Can it now be programed with your current version of this project?
Hello, men the programmer works 100%¡¡¡ congratulations, but
the programmer only work with BASIC code, i´m try with
C code copiled with PIC C and dont work.
djsaw1994:
Hello, men the programmer works 100%¡¡¡ congratulations, but
the programmer only work with BASIC code, i´m try with
C code copiled with PIC C and dont work.
you see the picture.
sorry for bad inglish, i´m spanish.
Hey,
That is a weird error, comes from the hex file itself, you should try to convert it to INTEL HEX format if you can.
To all others : I receive a lot of questions, unfortunately I don't have time to support that project anymore, because of my studies. I am really sorry about that. I also have seen that the C# code has disapeared, i will repost it as soon as possible.
I'm trying to download the Program from the second post. But something seems to be wrong with the file. I'm not able to open it. Is it really a zip Archive?
The zip in the post is corrupted.
Is there anyone with the original working version willing to upload it somewhere?
cheers
P.s. I did manage to repair the downloaded zip from the second post using some 'diskinternals zip repair' tool (I can start the ArduinoPic.exe, can't test if it is working correctly at the moment). Not sure how to attach anything to this post, but some zip-repair tool might help you too.
p.s.: when you type a reply, just below the textfield there is a little text "Additional Options...". You have to click on it, then you see where you can upload ("Attach") files.
EDIT: Just did it myself. Here's the recovered zip-file.
I'd like to use my Arduino to program a PM25LD010C-SCE chip. It's actually an 8-pin bios flash chip for a computer graphics card. I'm wondering if this will allow me to program that chip, and if not, whether it could be done by modifying your code/schematic?
Hi, cool project, very nice.
I want to try it.
The reason is that I am developing a project that can benefit from it. My project uses a PIC bootloader, and this Arduino-PIC Programmer seems to be a nice combination to my project.
[My questions]
It seems that I can use the 16F628A or 16F88 or 16F886/887 for tests, right?
And, is there a list of already tested MCUs?
The GUI Uploader Application is also available?
Is there any current website with information about it?
*The photo in this post is the micro-black-box (as in aviation) prototype, which is part of the Moleculine Project.
Below URL to software I am using:
My Project is called Moleculine Project:
MicroBlackBox Prototype:
Also, there is another PIC Programmer using RaspberryPI here (which I am also using):