hi cowasaki,
bear in mind that the tft you using is a 32 pin version, which means that the touch controller is direct connected to the spi bus and share with the sd card. if you look at the touch library, it is written for the 40pin version, of which the touch controller is not connected to the spi bus. thats why you cannot get the touch working.
cowasaki:
It wasn't in the CTE shield it was in the back of the LCD. It was a 2Gb Sandisc micro SD.I don't think that the CTE shield is quite right for the touch part of the wiring somehow..... It works for the TFT (so long as I use CTE's modified UTFT library) and the micro SD card works but their touch software is rubbish and doesn't work. If I use henning's software I just get a detection that the screen has been touched but it always returns the same values....