I have an Arduino ADK board, http://arduino.cc/en/Main/ArduinoBoardADK, the same one. I have burnt a program to the board and getting an error in the Serial Monitor as:
Error: OSCOKIRQ failed to assert
How to solve it?
Some people advised to supply 7-12V to Vin. I did that, but it didn't help.
for sure it is a power issue, the voltage regulater eats a lot of stuff try measuring the power at the +5v on the ADK and make sure the minimum standard voltage is there so that this ADK may work.
The problem is that USB devices take a lot to function and as such here not only the ADK needs power to function + the AVR but also the USB periferal device needs power for functioning too.
And btw I have a rooted HP touchpad with CM9. Any idea if it has Android Open Accessory support? Running Android 4. I am not sure if it's usb port is compatible for ADK.
darkowlzz:
And btw I have a rooted HP touchpad with CM9. Any idea if it has Android Open Accessory support? Running Android 4. I am not sure if it's usb port is compatible for ADK.
By default, CM9 doesn't have support for Android Open Accessory support. You have to specifically add the usb.jar file
Hey guys,
I am also stuck in the same issue..also tried solution suggested by sundar but it didn't work.
Is an external supply(other than USB) mandatory for Max3421 to work?