Load the blink sketch, blink an LED on pin 3, say 100ms on and 100ms off. Once that is working, add the piezo to the circuit, from pin 3 to ground (through a small resistor, 100 ohms or so is best if you have one.)
What do you hear from the piezo?
Load the blink sketch, blink an LED on pin 3, say 100ms on and 100ms off. Once that is working, add the piezo to the circuit, from pin 3 to ground (through a small resistor, 100 ohms or so is best if you have one.)
What do you hear from the piezo?