Small-run PCB assembly

I use a company in china for my assembly. They charge me about $6 per board and a setup cost of about $250. That includes the manufacture of the PCB as well.
Good quality boards. Shipping to the UK normally costs me about £35
The contact email is
info@junhao-cn.com

I think that Elecrow is a good choice.
They don't only provide PCB fabricate service without charge extra fees for color options,
they also provide PCB Assembly service.
http://www.elecrow.com/services-c-73/prototyping-service-c-73_120/pcb-assembly-p-366.html

Hope you find this useful.

Advanced Circuits
They provide a free PCB software. I think the minimum for a 2-layer board is like $33 with 4 board minimum. But double check me on that.

I happened across another someone else mentioned elsewhere:
http://www.oshpark.com/

Michael

This thread has become an excellent resource, so thank you to all who have contributed.

Can anyone report on their experience using the assembly services of any of the above (or any service not already mentioned, for that matter)?

The companies that we used were quite good. But you have to make sure you specify EVERYTHING exactly as you want it. Also unless you are dealing with large quantities you will need to supply your own parts. You should however do this for any specialty high value parts. (We post the sensors we use out as they are hellish expensive) If you do this you know they are yours.

I think you can buy it from Shenzhen China,because there are lots of PCB companies and the price is reasonable,so you can have try it. I've been getting most of my recent boards from these site :http://www.goldphoenixpcb.com ,http://www.wonderfulpcb.com

I second OSH Park for PCB fabrication. For the most part, I am still in the "cooked to order" business phase. I get stencils from OSH Stencils and manually pick-and-place and use a homebrew reflow oven (not too ironic that I sell toaster oven reflow conversion kits).

I have toyed with the idea of getting a run of product from Small Batch Assembly. They don't fab boards, but it appears that the interface between OSH Park's medium run service and their assembly service would work out nicely (you'd be having them populate ten panels). Also, they have an inventory of common parts in stock that you don't need to supply (you get something akin to DigiKey's T&R price per unit). Everything else you either send them as cut tape or a reel (they return any excess).

pico:
..Can anyone report on their experience using the assembly services of any of the above (or any service not already mentioned, for that matter)?

I used the PCBA turnkey solution from http://www.nexpcb.com
, located in China, include PCB Fabrication, Components, assembly and free-shipping. Please refer to one of customer stories - Apitronics Wireless Platform

Hi All, A-TECH CIRCUITS offer both PCB manufacturing and PCB assembly service, small-run PCB assembly is also available, it could be one of good choices if you have request.

The best option i think would be choosing a company with both PCB and PCB assembly capabilities.
And for producing PCBs it is simple that you pass on your Gerber files, when you want additionally PCB assembly services, simply pass on your BOM list, with all the assembly components inside.
The start up quantity various from company to company, so you just have to discuss with them. And of course everybody is looking for a long term partnership.
Visit YuCha Electronics
View YuCha Electronics' Products

Hi, you can try www.huaswin.com

Huasiwn supply one-stop facility for your products: PCB design, PCB fabrication, components procurement, SMT and DIP assembly ,IC pre-programming / burning on-line, prototype and mass production.

PCB includes: Rigid PCB (1 to 30 layers), Flexible PCB: up to 10 layers, Rigid-Flex: up to 6 layers.

offering lowest price, high quality and on time dleivery and very nice after sales service.

contact: vicky@huaswin.com

I know that Hampoo Electornics based in China provides small and medium run pcb service. To get a instant quote, please click http://ems.hampoo.com

Hi, this is Deray from Deegou, a small team located in Shenzhen.We dedicate to provide rapid PCB prototyping, and small batch PCB assembly for engineers and makers.

If anyone has requirements, please do not hesitate to contact us.

Thanks, have a good day!

Deray | Electronics Engineer
Email: deray@deegou.com
Website: deegou.com

pico:
These days, there are lots of options for getting PCB board made up, but what if you want to skip the DIY soldering and get a bunch of boards actually assembled? I appreciate this is going to require minimum quantity runs to make it even remotely economical, but what are those minimum quantities, and what are the ins-and-outs of the process?

hi dear this is Jodie, we war interesting your project. Specialized in EMS business locate at ShenZhen area provoding in -house SMD,COB,DIP,casing assembly to turnkey solution.(PCB&PCBA)
IBe Electronics

M: (86) 13692290310 / P: (86) 755-81785391
E: Jodie@pcbaaa.com Skype: jodiezhou0710

I had Macrofab assemble my Neutrino:

https://www.kickstarter.com/projects/rabidprototypes/neutrino-the-tiny-32-bit-arduino-zero-compatible

They're in Texas, and specialize in short runs. Very affordable. Those prototypes were only $35 ea. That's including the cost of the components and shipping. Three week turn time, but they should get faster once they start getting enough orders that they can stop using OSHSpark.

Hi,

We are new to the forums but we offer low volume assembly services at very reasonable prices. We are offering free assembly for a limited number of initial customers.

Our prices start @ $99 for up to 10 individual boards. We can procure stencils and parts and can also offer some passives (currently limited to resistors and capacitors ) for free so you will not need to procure these or send them in with your kit.

If you have any questions at all please contact us!!!

Thank you and have a great day,

Art
info@flatfeeassembly.com
www.FlatFeeAssembly.com

scswift:
I had Macrofab assemble my Neutrino:

https://www.kickstarter.com/projects/rabidprototypes/neutrino-the-tiny-32-bit-arduino-zero-compatible

They're in Texas, and specialize in short runs. Very affordable. Those prototypes were only $35 ea. That's including the cost of the components and shipping. Three week turn time, but they should get faster once they start getting enough orders that they can stop using OSHSpark.

http://macrofab.net/

Thank you, scswift! This was a seriously good find! These guys offer single board fab & assembly for crazy cheap. Any other place on the planet seems to charge at least $400 for a small batch (10 or less), but I've been quoted up to $1300 for ten boards! I just ordered 10 from MacroFab for $260 (fab and assembly), and I just can't believe that I could've ordered a single board for $37! Seriously crazy. I really hope these guys take off. They're tapping an entirely new market.

We are a PCB and PCBA maker. Sometimes, the client just ask us for 1 or 3pcs PCBA. But is not very practical, because the we can not assure all the 1 or 3pcs of PCBA is perfect after assembly, what if something bad happened, also we need to adjust the smt machine before production. So, in my opinion, at least 5PCS PCBA need to be ordered, just to convenient the supplier for assembly and yourself for testing. FYR :slight_smile:

Would like to recommend to try out assembly services of Dashunchang Electronic Co., Ltd, ( https://dsc-pcb.com/) , They are offering PCB Online Quote System for consumers .

Introduce a supplier for you that I knew via a SeeedStudio distributor.

I had them assemble 10 prototype boards. Per boards only cost 15 dollars. Very cheap price and also fast delivery, I received my boards after around 2 weeks.

http://www.deegou.com/

Here is the picture that they sent to me when the boards were finished.