Hi guys,
Since I have sold and/or used all of my boards, I decided to make a batch of new ones.
The major updates of the Rev 3 boards will be:
- Smaller: 37x48mm, vs. 43x50mm Rev 2
- Will use a slightly better LDO for 3.3V: MCP1825S. With only 210 mV drop out, so may benefit people like myself that using lots of servos powered from 5V.
- 0.1 inch pin spacing for servos!!!!111
See attached pictures.
I will be making a new batch of 10 boards, mostly for my own use. If you want any please let me know. Also if you have any suggestions/comments I will be interested to hear. I have a choice of different board colours and thicknesses too...
