I have got two Arduino Duemilanove ATmega328 from ebay (Hongkong)
I can not upload the sketch I get the error message:
avrdude: stk500_getsync(): not in sync: resp=0x00
Serial loop-back is working
Pin 13 is blinking
I have got two Arduino Duemilanove ATmega328 from ebay (Hongkong)
I can not upload the sketch I get the error message:
avrdude: stk500_getsync(): not in sync: resp=0x00
Serial loop-back is working
Pin 13 is blinking
if you are using the robomoto board then rev1.0 of the Arduino Ide won't work. try the 0021 rev. I got it to work for me.
Try selecting both the "Duemilanove 328" and "Uno" boards in the IDE.
Since you got it from eBay, it is going to be tough to tell what was done with it. The clone boards from Amazon and eBay generally have the most problems.