buton:
second try i hooked the 32.768 khz clock i bought directly to the sensor and things got betterfirst reading is good, second reading is bad...
Temperature raw =30027
Pressure raw =2047
Real Temperature [°C]=31.00
Compensated pressure [mbar] =-12747
2nd order compensated temperature [°C] =31.00
Temperature raw =49151
Pressure raw =2047
Real Temperature [°C]=175.00
Compensated pressure [mbar] =-16794
2nd order compensated temperature [°C] =175.00i reset and put my finger and temperature increases
hi, I am new on the forum, I play with arduino about few months,
now I want to make my MS5541 pressure sensor working,
I've used code from above of this page of this topic,
and made this conversion
"const double TEMP = 200 + ((dT * (c6 + 100)) >> 11);
double TEMPREAL = TEMP/10;"
but it isn't working well,
I have that readings:
"
Temperature raw =29549
Pressure raw =2047
Real Temperature [°C]=28.00
Compensated pressure [mbar] =-12646
2nd order compensated temperature [°C] =28.00
Temperature raw =49151
Pressure raw =2047
Real Temperature [°C]=175.40
Compensated pressure [mbar] =-16794
2nd order compensated temperature [°C] =175.00
"
could you help me how to set it
properly?
I made wires connection as it is in description
of the code