Go Down

Topic: Eagle Cad Library for Arduino Pro Mini, Arduino Nano (Read 39559 times) previous topic - next topic


I do a lot of little projects where I use an Arduino Pro Mini or Nano and ether solder them directly to the board or put in pin headers that allow me to simply snap the unit into the board. 8 months ago I put together an eagle cad library and posted it to my web site. In that time it has been downloaded over 6000 times.

I decided to move this to a project and posted it to git hub with lots of improvements.

The link is

I have included all the pinouts I have seen. It seems that A4-A7 move around the board depending on where you order it from.

I have also included a StepStick in the library, I use them from time to time and it is nice to simply add them to the schematic as well.

I hope people find it helpful.

Note to mods, if this is the wrong place to post this please feel free to move it.




Thanks a lot. This library also have the element step stick (A4988)


Hi guys,

So I downloaded the library, but I cannot open it in Eagle 7.7 or 7.4, it says:


line 8, column 16: This is not an EAGLE file.

Any suggestions? Thanks!


Never mind, resolved, I had to use "Clone or Download" instead :)

Go Up