Hi, I've tried your library but it does not seem to work with the board that I have. This is myTCS230 board (bought it on Ebay) http://www.bajdi.com/?attachment_id=940
I've connected OE to pin 8, S2 to pin 12, S3 to pin 13 and connected 5V and GND. I then tried the example calibrate sketch but I only get [0,0,0] values. The other sketches also don't work for me. The blocking sketch only gives 0 all the time, the non blocking sketch give [255,255,255] not matter what I hold in front of the sensor.