I am having difficulties with getting to work this two together. I have tried other libraries and was not able to get them working. Other stuff (such as sensors and led) is working fine.
I am using Arduino Uno Rev3
Ethernet Shield for Arduino Uno R1 R2 R3 - ENC28J60 RJ45 - http://goo.gl/JEIX5
Arduino-1.0.1 software
Ubuntu 11.04
The problem is that it cant get an ip address from router. I have also tried declaring static ip and it didnt work. All this I tried without adding any other libraries.
I also tried other libraries such as
http://code.google.com/p/flamingoarduino
I also found this thread http://arduino.cc/forum/index.php/topic,27556.0.html but most of the links are not working anymore.
When I tried it with flamingoarduino I got this error:
arduino-1.0.1/libraries/EncEthernet/enc28j60.c:18:55: error: WConstants.h: No such file or directory
arduino-1.0.1/libraries/EncEthernet/enc28j60.c: In function ‘enc28j60ReadOp’:
arduino-1.0.1/libraries/EncEthernet/enc28j60.c:46: error: ‘LOW’ undeclared (first use in this function)
arduino-1.0.1/libraries/EncEthernet/enc28j60.c:46: error: (Each undeclared identifier is reported only once
arduino-1.0.1/libraries/EncEthernet/enc28j60.c:46: error: for each function it appears in.)
arduino-1.0.1/libraries/EncEthernet/enc28j60.c:60: error: ‘HIGH’ undeclared (first use in this function)
arduino-1.0.1/libraries/EncEthernet/enc28j60.c: In function ‘enc28j60WriteOp’:
arduino-1.0.1/libraries/EncEthernet/enc28j60.c:66: error: ‘LOW’ undeclared (first use in this function)
arduino-1.0.1/libraries/EncEthernet/enc28j60.c:73: error: ‘HIGH’ undeclared (first use in this function)
arduino-1.0.1/libraries/EncEthernet/enc28j60.c: In function ‘enc28j60ReadBuffer’:
arduino-1.0.1/libraries/EncEthernet/enc28j60.c:78: error: ‘LOW’ undeclared (first use in this function)
arduino-1.0.1/libraries/EncEthernet/enc28j60.c:92: error: ‘HIGH’ undeclared (first use in this function)
arduino-1.0.1/libraries/EncEthernet/enc28j60.c: In function ‘enc28j60WriteBuffer’:
arduino-1.0.1/libraries/EncEthernet/enc28j60.c:97: error: ‘LOW’ undeclared (first use in this function)
arduino-1.0.1/libraries/EncEthernet/enc28j60.c:109: error: ‘HIGH’ undeclared (first use in this function)
arduino-1.0.1/libraries/EncEthernet/enc28j60.c: In function ‘enc28j60Init’:
arduino-1.0.1/libraries/EncEthernet/enc28j60.c:163: error: ‘OUTPUT’ undeclared (first use in this function)
arduino-1.0.1/libraries/EncEthernet/enc28j60.c:164: error: ‘HIGH’ undeclared (first use in this function)
arduino-1.0.1/libraries/EncEthernet/enc28j60.c:170: error: ‘INPUT’ undeclared (first use in this function)
arduino-1.0.1/libraries/EncEthernet/enc28j60.c:173: error: ‘LOW’ undeclared (first use in this function)
I have then removed Ethernet library that comes with IDE and tried again and the problem was the same.
Maybe there is a problem with the version of Arduino IDE. I dont know. Does anybody have library that will work with this shield? I am fairly new to Arduino and I just cant seem to figure it out.
Update: Every sketch it tried was from examples that came with the specific library.
Thnx in advance.