Go Down

Topic: GSM Shield V2 -> No input on audio jack (Read 310 times) previous topic - next topic

dsp1207

The GSM Shield 2 uses the wrong audio channel for the M10 chipset, so I've managed to the library by adding a AT+QAUDCH=1 command to the startup procedure. Now I get audio out through my headphones, but the input doesn't work. I've tried AT+QMIC to set microphone gain levels to maximum on all channels, but it still doesn't work. Can anybody help?

ir_fuel

Thanks for the "AT+QAUDCH" command. Now I also get sound in the headphones.
Have you tried using the mic connectors on the shield to see if those work?

Go Up