Go Down

Topic: BLE Service and Characteristic limitations (Read 507 times) previous topic - next topic

pat-ase30

Hello everyone,

I have one simple question about BLE limitations on Arduino 101 or on a more general point of view :

Except the 20 bytes limit in a characteristic, what are the limitations :
- Max number of Services ?
- Max number of Characteristics in a Service ?
- Max total number of data including all Services and Characteristics ?

In fact, I encounter a limitation problem but I could'nt find any real limit value.

I my application on Arduino 101, I use :
- A total data size of 448 bytes
- 6 Services as follows :
     - Service 1 : 9 characteristics
     - Service 2 : 10 characteristics
     - Service 3 : 9 characteristics
     - Service 4 : 6 characteristics
     - Service 5 : 11 characteristics
     - Service 6 : 8 characteristics

The max number of bytes in my Characteristics is 128 bytes and is OK (may be read / write)
The max number of bytes in my Services is 145 bytes and is OK (may also be read / write)

With all these data, the BLE peripheral is not able to start.
If I suppress any of Service, or Characteristic, or several data in a characteristic, then it's Ok.
I can clearly see that it's a size limitation, but I can't find any information about such a limitation.

Thank's in advance for any help and answer.

Regards
Patrick.



tshumay

Hi Patrick,

We are discussing a similar/related issue in my thread as well. Sandeep added a bit more detail there.

https://forum.arduino.cc/index.php?topic=470583.0

Go Up