I've downloaded and installed the subject library. The sketch (RealTimeClockDS1307_Test)
complies and loads without error but when I run it and view the Serial Monitor I just get
a sequence hex chars that do not appear to be incrementing... the output on
the Serial Monitor looks like this:
1: FF-1F-3F 1F:7F:7FP
2: FF-1F-3F 1F:7F:7FP
3: FF-1F-3F 1F:7F:7FP
4: FF-1F-3F 1F:7F:7FP
5: FF-1F-3F 1F:7F:7FP
6: FF-1F-3F 1F:7F:7FP
7: FF-1F-3F 1F:7F:7FP
8: FF-1F-3F 1F:7F:7FP
9: FF-1F-3F 1F:7F:7FP
10: FF-1F-3F 1F:7F:7FP
11: FF-1F-3F 1F:7F:7FP
12: FF-1F-3F 1F:7F:7FP
13: FF-1F-3F 1F:7F:7FP
14: FF-1F-3F 1F:7F:7FP
15: FF-1F-3F 1F:7F:7FP
16: FF-1F-3F 1F:7F:7FP
17: FF-1F-3F 1F:7F:7FP
18: FF-1F-3F 1F:7F:7FP
19: FF-1F-3F 1F:7F:7FP
20: FF-1F-3F 1F:7F:7FP
21: FF-1F-3F 1F:7F:7FP
22: FF-1F-3F 1F:7F:7FP
23: FF-1F-3F 1F:7F:7FP
24: FF-1F-3F 1F:7F:7FP
25: FF-1F-3F 1F:7F:7FP
Send ? for a list of commands.
26: FF-1F-3F 1F:7F:7FP
27: FF-1F-3F 1F:7F:7FP
28: FF-1F-3F 1F:7F:7FP
Looking at the DS1307 datasheet the default/power on date/time should be 01/01/00 00:00:00 but I can't
get to this from FF-1F-3F 1F:7F:7FP ??