Ratto93, ho provato a sostituire il potenziometro con quello lineare (che funziona, verificato con un led), ma ho sempre lo stesso risultato.
Ho provato con un altro codice (riportato qui sotto), uguale nel concetto, che ho trovato in internet, dove con un video mostra che funziona e cosa fa, ma ho sempre lo stesso risultato. Mi sto demoralizzando. Comincio a pensare che sia la scheda di Arduino UNO che ha qualcosa che non va.
Paolo
#include <SoftwareServo.h> (ho sostituito SoftwareServo con Servo)
SoftwareServo myservo; // create servo object to control a servo
int potpin = 0; // analog pin used to connect the potentiometer
int val; // variable to read the value from the analog pin
void setup()
{
myservo.attach(2); // attaches the servo on pin 2 to the servo object
}
void loop()
{
val = analogRead(potpin); // reads the value of the potentiometer (value between 0 and 1023)
val = map(val, 0, 1023, 0, 179); // scale it to use it with the servo (value between 0 and 180)
myservo.write(val); // sets the servo position according to the scaled value
delay(15);