strykeroz:
Hi,Just wondering what pin definitions you use in place of these on the ATTiny85 version?
// Output pins for PWM
#define R_PIN 3 // Red LED
#define G_PIN 5 // Green LED
#define B_PIN 6 // Blue LED
As there is no D6 on that uC I'm hoping your ATTiny85 version was using 0, 1 and 4 (physical legs 5,6 & 3) which have hardware PWM support for that analogWrite() later in the sketch. Cheers ! Geoff
Sorry I posted the sketch for the Arduino.
On the at85 I use 3,Red 0,Green 1,Blue.