Go Down

Topic: Arduino Weight Measurement using Load Cell (Read 497 times) previous topic - next topic


Dear All,

I want to construct a project Using Load cell measuring weight of 0 to 80kg.

I would like to use Arduino Uno for this project.

Is there any link to this mention project?

Thank you very much.

Best Regards,


Seems like Goggling:     Arduino load cell       gives quite a few results.

No technical PMs.
The last thing you did is where you should start looking.

stefanus kusnadi

Load Cell need exitation voltage, could be 0.5 Vdc, 1 Vdc or 2 Vdc, then you have to enter the load cell sensitivity  according to the exitation voltage you use.


Sparkfun & Robot Shop sell load cells and amplifiers with tutorials. Omega Engineering has many load cell and interface options depending on the accuracy you need and your budget.


I have not shared any links to similar projects because I don't know the specifications of your system.

However, I would like to emphasize the importance of considering  the performance requirements of your project when selecting load cells and accessories for your system.

This guide has most of the things that you need to know before selecting a load cell for your project https://tacunasystems.com/zc/the-essential-guide-to-load-cells

Go Up