Go Down

Topic: Windows/Linux/Mac Eclipse plugin to compile and upload arduino sketches (Read 328118 times) previous topic - next topic

Maitland

Jantje: Thanks very much for this excellent plugin. I only wanted Arduino so I could configure Marlin 3D printer firmware, and as one used to Eclipse with all it's faults, I found the Arduino IDE a complete pain. Installed (only one non- issue) modified, compiled, uploaded, all without tears.

The little non- issue? When importing code, it requires the folder to exist already in the workspace. Would it be too hard to create it automatically, as C/C++ makefile import does?

Jantje

Do not PM me a question unless you are prepared to pay for consultancy.
Nederlandse sectie - http://arduino.cc/forum/index.php/board,77.0.html -

EVP

Hi,
 
I've been using Sloeber and run into a problem.

I have a Due board and a SD card board. There is no problem - as far as i  know- with the wiring or the card.

I have successfully uploaded the SD card examples in the Arduino IDE to the due and confirmed they all work. They write a file to the card of exactly what is expected.

I had successfully used Sloeber on other projects and haven't had a problem with it. but I can get any of the SD card examples compiled in Sloeber to work.

The SD.init example does work and gives the card info, but SD.begin always fails.

I can compile the same sketch in the Arduino IDE and upload it and it works fine.

Now, I am only using 3.1 , I will up grade if I have to but I don't have all that much time, so if its something else that would be handy.


Best Regards

 


EVP

I've just upgraded to 4.2 and it still doesn't work. The code is the Arduino IDE example I have copied to a Sloeber project.

I must be doing something wrong.

Jantje

Quote
I must be doing something wrong.
I agree. And with the info provided there is no way to find out what.
First thing to do: check all the files used during compilation
Do not PM me a question unless you are prepared to pay for consultancy.
Nederlandse sectie - http://arduino.cc/forum/index.php/board,77.0.html -

EVP

I've got 4.2 setup correctly now and have successfully uploaded the SD card examples.

Thanks for the reply, confirming I was wrong was probably helpful.

Sloeber is brilliant I love it.

Thank you.

Jantje

Thanks for the reply, confirming I was wrong was probably helpful.
It is amazing how many times people confirming I probably was doing something wrong helped me out.
It's not a nice message to give bt it is helpfull from time to time :-)

Sloeber is brilliant I love it.
I know :-) thanks.
Do not PM me a question unless you are prepared to pay for consultancy.
Nederlandse sectie - http://arduino.cc/forum/index.php/board,77.0.html -

gfvalvo

Hi Jantje, et al:

I recently posted what I though was an issue on the Sloeber GitHub. Wim Jongman helped me out. Turned out, the "problem" was my fault.

I wanted to say thanks and that I will become a Sloeber supporter via Patreon.

I do have a request / suggestion for your consideration. Should it become financially feasible, it would be great if you established a stand-alone Sloeber Users Forum. It could be divided into categories like Installation, Usage Tips, Problem Help, etc. That way, users could help each other much more efficiently than via this single thread on the Arduino forum. Also, many "problems" are simply solved (like mine). They don't rise to the level of requiring an open Issue on GitHub, but could be handled via the forum.

Anyway, thanks again. Hope you consider this suggestion.


Jantje

I do have a request / suggestion for your consideration. Should it become financially feasible, it would be great if you established a stand-alone Sloeber Users Forum. It could be divided into categories like Installation, Usage Tips, Problem Help, etc. That way, users could help each other much more efficiently than via this single thread on the Arduino forum. Also, many "problems" are simply solved (like mine). They don't rise to the level of requiring an open Issue on GitHub, but could be handled via the forum.

Anyway, thanks again. Hope you consider this suggestion.


After going over a zillion things that I wanted to respond and rejected this is the only good response I can come up with:
Thanks for the nice words and suggestion.
I'm looking forward to your support.
Best regards
Jantje
Do not PM me a question unless you are prepared to pay for consultancy.
Nederlandse sectie - http://arduino.cc/forum/index.php/board,77.0.html -

gfvalvo

After going over a zillion things that I wanted to respond and rejected this is the only good response I can come up with:
Thanks for the nice words and suggestion.
I'm looking forward to your support.
Best regards
Jantje
No problem. Although, your response was a little enigmatic. I'm not sure if you liked my idea or not.   :smiley-eek:

Jantje

No problem. Although, your response was a little enigmatic. I'm not sure if you liked my idea or not.   :smiley-eek:
Some thoughts
I see many pro's and many con's in a forum.
I fully agree a single thread here is not the forum way to go.
I understand some people are reluctant to create issues.
Sloeber income is 250$ a month (pre-tax).
Sloeber is my only income right now.
I love Sloeber but I'm getting to the point I can't afford it any more.

Conclusion
I'm not looking to spend more money then I already do for Sloeber.
I'm not looking to spend more time then I already do for Sloeber.
Do not PM me a question unless you are prepared to pay for consultancy.
Nederlandse sectie - http://arduino.cc/forum/index.php/board,77.0.html -

Go Up