Aggiornamento Due

Non è proprio "quello", ma lo segnalo comunque.

Massimo @ TED

http://www.ted.com/talks/massimo_banzi_how_arduino_is_open_sourcing_imagination.html

(o forse è "vecchio" e sono io che me lo ero perso ? )

Sarà "vecchio" come data ma al presente una grande e intramontabile presentazione da vero GURU.
Aspetto con interesse il prossimo world wide talk. Forza Massimooooooooo !!!

Per chi fosse interessato ecco il video della presentazione di massimo su youtube

wow, grazie!

sulla scia della vecchia guerra fredda mi chiedevo, ma anche a Mosca fanno cose del genere ?
Sarebbe bello Massimo col colbacco nella Piazza Rossa :slight_smile:

E la maglietta di Massimo è quella ufficiale? Oltre a copie varie di dubbio gusto cosi' minimal è piacevole.
Sarà in vendita nello store oppure fa parte di uno dei progetti Arduino at heart ?

La venderemo nello store, non so ancora quando

m

Il decoder HW è stato mappato? Ed è previsto a livello software un metodo per poterlo utilizzare in maniera agevole?

scusate ma non sono ferratissimo in inglese ma sto rimediando con un corso, chi mi fa un riassunto di quello che diceva Massimo Banzi nel video.

@Massimo Banzi: cmq complimenti per i tuoi sforzi, mi sono fatto tentare e martedi farò un giro a Torino.

Janos:
Il decoder HW è stato mappato? Ed è previsto a livello software un metodo per poterlo utilizzare in maniera agevole?

anche se non lo fosse, secondo me non passerà troppo tempo prima che qualcuno lo faccia :slight_smile:

Cos'è il decoder HW?

Credo intenda il decoder in quadratura per gestire gli encoder incrementali.

Si, esatto. Con gli ATmega gli encoder andavano letti mediante interrupt mentre il SAM3X ha un decoder hardware dedicato (appunto per leggere i segnali in quadratura provenienti da un encoder).

Janos:
Si, esatto. Con gli ATmega gli encoder andavano letti mediante interrupt mentre il SAM3X ha un decoder hardware dedicato (appunto per leggere i segnali in quadratura provenienti da un encoder).

casualmente sto giocando in questi giorni con un encoder e sto trovando qualche problema

Iz2rpn:

Janos:
Si, esatto. Con gli ATmega gli encoder andavano letti mediante interrupt mentre il SAM3X ha un decoder hardware dedicato (appunto per leggere i segnali in quadratura provenienti da un encoder).

casualmente sto giocando in questi giorni con un encoder e sto trovando qualche problema

Ok, però non parliamone qui. Apri un nuovo thread nell'apposita sezione :slight_smile:

tuxduino:

Iz2rpn:

Janos:
Si, esatto. Con gli ATmega gli encoder andavano letti mediante interrupt mentre il SAM3X ha un decoder hardware dedicato (appunto per leggere i segnali in quadratura provenienti da un encoder).

casualmente sto giocando in questi giorni con un encoder e sto trovando qualche problema

Ok, però non parliamone qui. Apri un nuovo thread nell'apposita sezione :slight_smile:

si hai ragione ma prima mi voglio arrabbiare al 100%

Aggiornamenti

[quote author=Massimo Banzi link=topic=113460.msg961233#msg961233 date=1350548024]
@pico

As I just mentioned this is the first board with the SAM3X we're going to release so there is plenty of opportunities to create different layouts (as a matter of fact we have a new layout we've been playing with for a while)

I think there is a lot of people who prefer to re-use as much as possible of what they currently have before they have to throw everything away.. Our current Eth and Wifi shields, to mention two, work with the Due as they are able to detect and adapt to the whatever voltage the main board is operating at.

Making the board 5v tolerant would have made the it way too expensive. The market is now full of heavily subsidised (even sold at loss...) products that make it quite difficult to fight these battles.

The beauty of open source is that in a few days time you will be able to download the Arduino Due eagle file, design a much better layout and sell your own boards benefiting from our lack of vision :slight_smile:

@Graynomad
we introduced the R3 layout a long time ago and we explained why the IOREF pin is there... some people understood and implemented the correct measures to make their shields compatible, some others didn't ... you'll see a lot more shields made available with the full implementation of R3

m[/quote]

[quote author=Massimo Banzi link=topic=113460.msg961283#msg961283 date=1350551185]
Jantje

Next week we release IDE v 1.5 and there will be a blog post discussing some of the internals of the new version.

m[/quote]

[quote author=Massimo Banzi link=topic=113460.msg961301#msg961301 date=1350552137]
I don't have specifics on that.. as I said there will be a blog post

1.5 will be Due only at the beginning. shortly after there will be a 1.0.2 with some of the enhancemens backported (there are some nice user experience improvements in it)
Later on when 1.5 is stable we'll merge and have only one IDE.

if you can point me to an issue here Google Code Archive - Long-term storage for Google Code Project Hosting. I'll have it checked.

m[/quote]

Ma è certa la data del 22 ottobre? stiamo al 19 mi aspettavo di trovare informazioni, datasheet, prezzo ecc ecc sul sito arduino ma non ho trovato nulla...

Led:
Ma è certa la data del 22 ottobre?

Leggi qui:

astrobeed:

Led:
Ma è certa la data del 22 ottobre?

Leggi qui:
Arduino Due - #4 by astrobeed - Hardware - Arduino Forum

fra 2 giorni interessante