I have burned the bootloader on a mega 8 and mega 168 with Ponyprog in another circuit using a stk200 programer and a board with out the 16 Mhz crystal. They both blink on pin 13 fine when I place them in the standalone Arduino system on a breadboard circuit but I cant upload a skectch to the chips …

Help with Arduino on a Breadboard

stadham October 30, 2007, 1:42am 9

Thanks I will try that tonight after work.

Topic		Replies	Views
Must burn Bootloader everytime before programming Troubleshooting	10	2387	May 6, 2021
Arduino UNO (serial) communication problems IDE 1.x	3	899	May 5, 2021
breadboard arduino problems... Project Guidance	8	4782	May 5, 2021
Atmega2560 Pro Embed no sketch upload possible (timeout) Avrdude, stk500, Bootloader issues	7	1306	May 6, 2021
ATMega8a Bootloader Microcontrollers	9	3548	May 6, 2021