Adding pin 10 to the header would interfere with ICSP programmers, which are expecting SCK, MISO, MOSI, Reset, Gnd, and Vcc (3.3V or 5V).
One could add a 3-pin header to allow selection of D10 or Reset to be connected via jumper configuration.
Adding pin 10 to the header would interfere with ICSP programmers, which are expecting SCK, MISO, MOSI, Reset, Gnd, and Vcc (3.3V or 5V).
One could add a 3-pin header to allow selection of D10 or Reset to be connected via jumper configuration.