Go Down

Topic: Arduino IDE - Serial Monitor - how extending number of lines? (Read 358 times) previous topic - next topic

Didix

The serial monitor of the Arduino IDE buffers about 40'000..45'000 lines.

Is there a way to enlarge this size?

spycatcher2k

Drew.
http://www.uk-pcb.co.uk - My UK Based PCB Fab & Assembly Company
Design & Assembly work undertaken - Arduino repairs & testing - PM for details. PM me for non repair or testing, 1 to 1 support and I will charge you - beware!

Didix

Could you recommend one?

I also think about changing to PlatformIO.
Do they use a "real" serial monitor?

spycatcher2k

With the information you have given, no! I use putty or X-CTU for development, but tend to write my own for production in C#.
Drew.
http://www.uk-pcb.co.uk - My UK Based PCB Fab & Assembly Company
Design & Assembly work undertaken - Arduino repairs & testing - PM for details. PM me for non repair or testing, 1 to 1 support and I will charge you - beware!

DrAzzy

I use hTerm most of the time, personally. I love how it lets you use the modem pins (I often use them to monitor the state of pins in the project under test), and the encoding options. It's sufficiently feature-dense that it's got a bit of a learning curve, though, but once you get the hang of it, it's the swiss army knife of serial terminals.
ATtiny core for 841+1634+828 and x313/x4/x5/x61/x7/x8 series Board Manager:
http://drazzy.com/package_drazzy.com_index.json
ATtiny breakouts (some assembled), mosfets and awesome prototyping board in my store http://tindie.com/stores/DrAzzy

ballscrewbob

It may not be the answer you were looking for but its the one I am giving based on either experience, educated guess, google or the fact that you gave nothing to go with in the first place so I used my wonky crystal ball.

Go Up