xbee.h will not compile with MICRO

system · February 17, 2013, 8:17pm

I let you to the wrong xbee.h file ; the one I am using I got from:

Mega Rx from Xbee causing high voltage 1023 on all analog input pins

opened 10:35PM - 21 Dec 15 UTC

Hello, Having a very strange issue that seems associated to the Tx packet from …the Xbee to the Mega Rx (on any serial port) which then causes a stuck high voltage on all the mega input pins. Nothing seems to reset the high voltage (1023 analog reading on any input pin) except a hard reset which then reads normal until a the xbee is attached. Prior to updating the latest Xbee lib, it would only start the issue when a Rx packet came through to the mega, now it happens when I connect the Tx from the Xbee to the Rx of the mega pretty quickly. and hangs as it had before. Not sure if you might understand more of how the Rx packets might affect the analog input readings of the mega. Thanks. Alec

I am using the one from the March 9, 2012 post. This included the support for DIGIMESH.

Sorry.

I am using Arduino 1.0.3

Bill

Topic		Replies	Views
xBee.h doesn't compile with leonardo - Serial problem Networking, Protocols, and Devices	9	4973	May 6, 2021
Arduino micro rx error to xbee (tx works fine) Networking, Protocols, and Devices	3	723	May 6, 2021
Xbee & Arduino Leonardo Interfacing w/ Software on the Computer	3	1834	May 6, 2021
AltSoftSerial and Arduino MICRO Networking, Protocols, and Devices	2	2319	May 6, 2021
Problem with Series 1 XBee Networking, Protocols, and Devices	4	976	May 6, 2021

xbee.h will not compile with MICRO

Related Topics