All devices are set to N2km_ListenAndNode .
I checked also the documentation of the Axiom. The PGN's are supported. Engine Instance is set to 0. Can speed I tested the standard 250.000 up to 1.000.000, also lower than 250.000. Now I have all set back to 250.000 as I couldn't find out what the speed of the Axiom is (or if this is auto-sense).
This drives me crazy, all the work and now nothing is working. The device under itself can see each other. Will say the rudder position device can see the engine and visa vi. The strange thing is that I can see the GPS data and all other stuff coming from the axiom on the devices?!
Updated the Axiom also to latest Lighthouse as there where some bugs NMEA2k related in the past.
I remember when I have begun with all this I used an Arduino due, With that and the MCP 2562 I got them connected. I use now the SN65HVD234D with Teensy 3.2 & 3.5. FlexCan and all other libraries like NMEA2000 , NMEA2000_teensy, N2KMessages are included.
Do I have to set something Flexcan related?