Wow Nick! You have been on a role lately with all of the things you have been doing! I find myself referring to your posts and your blog quite a lot lately.
I am curious would it be difficult to change to 7-bit data? In some automotive applications I am lead to believe they use 7-bit but, don't quote me on that.
When I was doing that change I noticed there didn't seem to be any provision for different bit lengths, let alone 9 which was the trickiest.
Changing to other bit lengths should be trivial.
However for 7-bits you can "fudge" that by setting the high-order bit of the data you are sending. Since the high-order bit is sent last, and a stop bit is a 1, if you make sure that the high-order bit is a 1, then 8 bits of data with the high-order bit set, would look like 7 bits followed by a stop bit (well, 2 stop bits).
For receiving, just mask out the high-order bit (eg. "and" it with 0x7F).
cyclegadget:
I am curious would it be difficult to change to 7-bit data? In some automotive applications I am lead to believe they use 7-bit but, don't quote me on that.
If you want 5 - 8 bits of serial data, have you considered this library?
It replaces the existing HardwareSerial and it's quite a bit faster and has configurable buffer sizes (transmit and receive).
It looks like those amendments didn't work perfectly with 1.0.1 of the IDE.
The files above (same names) have been amended now and should work with 1.0.1. This test checked out on the logic analyzer:
void setup ()
{
Serial.begin (115200, true); // 9 bit mode
Serial.println ("--- starting ---");
} // end of setup
int i;
void loop ()
{
for (i = 0; i <= 0x1FF; i++)
Serial.write9bit (i); // send another byte
} // end of loop
Hi Nick et al.,
I know this topic is fairly old, but figured it was best to ask the question here vs. starting a new thread?
I recently got involved in a project where 9-bit serial data was required, and not really knowing what to do I was pretty excited to see Nick's work here (thanks, Nick!).
So my quick question is whether or not the mods to the library are specific to AVR-based micros, or more specifically will the mod work with ARM-based micros? I just don't know enough about how libraries work (yet) to be able to answer this question myself.
Thanks in advance for any pointers, and thanks again Nick for your work here!
The mod was specific to the way that the hardware on this particular processor worked. It probably can be carried over to similar ones in the same line (eg. the Mega2560).
As for ARM ones, they would have different hardware interaction. Quite possibly they might support some sort of 9-bit serial, however I just don't know.
Brilliant, this has saved me a lot of time, many thanks for taking the time to post this. It's great that we can share stuff like this online these days.
Ok, I get the Serial.write9bit but how do I set UCSZn = 7 in order to enable 9 bit function? Do have to turn it off in order to send an 8 bit or will Serial.write do the switch?
Sorry for asking such a basic question but I am kind of new at this.
I guess the version I published for Teensy 3.1, based on Nick's code, but with changes to use Arduino newer Serial.begin(baud, format)... isn't going to help you much.