I received my Due today and it too isn't showing up in the serial port menu. Whether it is plugged in to the native usb port or the programming usb port, it doesn't appear. I checked System Information and it doesn't get listed in the device tree. Running ioreg in terminal didn't show the device either.
I thought it might have been not enough power over the usb cable so I plugged in 5v in the DC jack and still no luck.
Is there a way to reset the Due?
Any help is greatly appreciated.
EDIT:
I should add that the L led is solid along with the On led, if that means anything.
EDIT 2:
I downloaded the IOUSBFamily Log Release from developer.apple.com to see if the OS X usb subsystem could shed any light on the situation. The only console message that might be related is this.
1/26/13 7:04:58.758 PM MDCrashReportd[326]: 326:2042986880|MDCrashReportd.m:deviceAttached| ERROR: Could not get a USBMux endpoint for the device with uid b7010c79b5bb8aa7f15161ad8d5af162f5ac38af. Ignoring.
It is had to ascertain whether this message is related to the Arduino Due at all as it does show any usb id's in the message.
It looks like the Due is bricked. Can anyone tell me if there is a way to unbrick it?
I tried the cable on another device and it worked fine. I bought another cable and the Due still refuses to show itself.
I guess it's time I bought the black magic probe and see if I can recover it that way. Does anyone have a link to the steps needed to reburn the boot loader?
I plugged it into the windows box i have and when connected to the programming port it doesn't do anything and when I plug in the native one, windows complains about the USB device having an issue.
I've just ordered the black magic probe to see if i can recover the device, if not I will send it back for replacement.
Hello,
i have the same Problems: ATmega 168 with a MacOX 10.6.8
PWR light is green 13 red is blinking...tried 4 different USB Cables , on Systemprofiler no Arduino device shows up .
I see no evidence that this was ever answered. I just purchased a Due for the extended IO.. Seems that I may have been Hosed, as I am having this problem also. And documentation is pretty horrible.