Hi to all
I can't download <Conceptinetics.h> header. I received "server error" for several time.
Could you please help me?
If anybody have it, Please send to my E-mail address as below:
bahmansotoudeh@yahoo.com
Thanks,Bahman
bahman89:
I can't download <Conceptinetics.h> header. I received "server error" for several time.
Could you please help me?
That's strange. The file is contained in the ZIP archive of Conceptinetics.zip (2013-06-24).
This is the file extracted from that ZIP archive date stamp 2013-06-24:
/*
Conceptinetics.h - DMX library for Arduino
Copyright (c) 2013 W.A. van der Meeren <danny@illogic.nl>. All right reserved.
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 3 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/*
This code has been tested using the following hardware:
- Arduino UNO R3 using a CTC-DRA-13-1 ISOLATED DMX-RDM SHIELD
- Arduino MEGA2560 R3 using a CTC-DRA-13-1 ISOLATED DMX-RDM SHIELD
*/
#ifndef CONCEPTINETICS_H_
#define CONCEPTINETICS_H_
#include <Arduino.h>
#include <inttypes.h>
#define DMX_MAX_FRAMESIZE 513 // Startbyte + 512 Slots
#define DMX_MIN_FRAMESIZE 2 // Startbyte + 1 Slot
#define DMX_MAX_FRAMECHANNELS 512 // Maxmim number of channer per frame
#define DMX_STARTCODE_SIZE 1 // Size of startcode in bytes
#define DMX_START_CODE 0x0 // Start code for a DMX frame
#define RDM_START_CODE 0xcc // Start code for a RDM frame
// Uncomment to enable interbyte gaps
// #define DMX_IBG 10 // Interbyte gap
// Speed your Arduino is running on in Hz.
#define F_OSC 16000000UL
// DMX Baudrate, this should be 25000
#define DMX_BAUD_RATE 250000
// The baudrate used to automaticly generate a break within
// your ISR.. make it lower to generate longer breaks
#define DMX_BREAK_RATE 99900
namespace dmx
{
typedef enum dmxState
{
dmxIdle,
dmxBreak,
dmxManualBreak,
dmxStartByte,
dmxFrameDetected,
dmxRecordData,
dmxData
};
};
class DMX_FrameBuffer
{
public:
//
// Constructor buffersize = 1-513
//
DMX_FrameBuffer ( uint16_t buffer_size );
DMX_FrameBuffer ( DMX_FrameBuffer &buffer );
~DMX_FrameBuffer ( void );
uint16_t getBufferSize ( void );
uint8_t getSlotValue ( uint16_t index );
void setSlotValue ( uint16_t index, uint8_t value );
void setSlotRange ( uint16_t start, uint16_t end, uint8_t value );
void clear ( void );
uint8_t &operator[] ( uint16_t index );
private:
uint8_t *m_refcount;
uint16_t m_bufferSize;
uint8_t *m_buffer;
};
class DMX_Master
{
public:
// Run the DMX master from a pre allocated frame buffer which
// you have fully under your own control
DMX_Master ( DMX_FrameBuffer &buffer, int readEnablePin );
// Run the DMX master by giving a predefined maximum number of
// channels to support
DMX_Master ( uint16_t maxChannel, int readEnablePin );
~DMX_Master ( void );
void enable ( void ); // Start transmitting
void disable ( void ); // Stop transmitting
// Get reference to the internal framebuffer
DMX_FrameBuffer &getBuffer ( void );
// Update channel values
void setChannelValue ( uint16_t channel, uint8_t value );
void setChannelRange ( uint16_t start, uint16_t end, uint8_t value );
public:
//
// Manual control over the break period
//
void setAutoBreakMode ( void ); // Generated from ISR
void setManualBreakMode ( void ); // Generate manually
uint8_t autoBreakEnabled ( void );
// We are waiting for a manual break to be generated
uint8_t waitingBreak ( void );
// Generate break and start transmission of frame
void breakAndContinue ( uint8_t breakLength_us = 100 );
protected:
void setStartCode ( uint8_t value );
private:
DMX_FrameBuffer m_frameBuffer;
int m_re_pin;
uint8_t m_autoBreak;
};
class DMX_Slave
{
public:
DMX_Slave ( DMX_FrameBuffer &buffer, int readEnablePin = -1 );
DMX_Slave ( uint16_t nrChannels, int readEnablePin = -1 );
~DMX_Slave ( void );
void enable ( void ); // Enable receiver
void disable ( void ); // Disable receiver
// Get reference to the internal framebuffer
DMX_FrameBuffer &getBuffer ( void );
uint8_t getChannelValue ( uint16_t channel );
uint16_t getStartAddress ( void );
void setStartAddress ( uint16_t );
// Register on receive complete callback in case
// of time critical applications
void onReceiveComplete ( void (*func)(void) );
protected:
// Startcode is default set to record dmx frames but
// can be used using this function.
// This is intended for future use
void setStartCode ( uint8_t value = DMX_START_CODE );
public:
static void (*event_onFrameReceived)(void);
private:
DMX_FrameBuffer m_frameBuffer;
int m_re_pin;
uint16_t m_startAddress; // Slave start address
};
#endif /* CONCEPTINETICS_H_ */
I downloaded the ZIP archive from DMX Library for Arduino - Browse Files at SourceForge.net