After a long search I found this and it works:
Try this:
Approach A: (Arduino IDE/Arduino as ISP)
- Open IDE
- Tools >> Board >> Arduino Duemilanove 2009/Nano w/328
- Tools >> Serial Port >> (choose correct one)
- Upload the ArduinoISP sketch (Files >> Examples >> Arduino ISP) to your working NANO
(unplug your main/working Arduino Nano)
- Wire up your 'target' board that is outlined in the tutorials (D11, D12, D13, +5v, GND & RESET) pins...
MAIN BOARD: >>> TARGET BOARD:
D10: >>> RESET
D11: >>> MOSI
D12: >>> MISO
D13: >>> SCK
GND: >>> GND
+5v: >>> +5v
-
Go to: Tools >> Board >> and choose ""Arduino Duemilanove 2009/Nano w/328"..
-
Tools > Burn Bootloader > w/ Arduino as ISP