M42SP-6TE stepper motor interfacing

Using Arduino Motors, Mechanics, Power and CNC
1

This is a 4-wire bipolar stepper motor. In the motor connector the first coil is wires 1 and 2, the second coil wires 3 and 4. Coils have 10 Ohms resistance.

The four pin arrangement with H-Bridge should work. (No H-bride available now to test, but with two wires it jump back and forth - will repost if H-bridge fails).

Schematic: http://arduino.cc/en/Reference/StepperBipolarCircuit.
Test code: Use the Arduino IDE built-in one rotation test code.
Graphical explanation of stepper motor operation: Controlling Stepper Motors with a PIC Microcontroller

Reson for his post: couldn't comment on the old forum post and no easily available info on this steppermotor.

2

Dear bobotus,
I am making a plotter with this motor, Can you help me with the pinout and voltage that you apply? Thanks

3

You have re-awakened a 9 years dead Thread and @bobotus is no longer a member of the Forum.

I suggest you start your own Topic and give us full details of your problem.

...R