So why not send a serial programmer too?
http://www.ebay.com/itm/CP2102-USB-2-0-to-UART-TTL-6PIN-Module-Serial-Converter-/130683943875?pt=LH_DefaultDomain_0&hash=item1e6d5ebbc3
This with a simple trace cut (trace to the RST pin) and a jumper add (from DTR hole to the now isolated RST pin) will allow easy programming thru the IDE.
To install a bootloader, you need an In System Programmer (ISP) to connect to the SPI pins.
I have an Atmel AVR ISP MKii from Mouser.com, very useful for All the Arduino chips.