¿Qué es funduino?

recientemente, buscando una arduino mega, me he encontrado que hay una placa exactamente igual pero de "funduino"
me gustaría saber que es, y que diferencia hay entre arduino y funduino.

:grin:

Yo estaba pensando mas en

Lo que me gustaría saber es si es arduino con el nombre cambiado, se programa igual y la unica diferencia que hay es el precio

Ninguna! Es un clon

Es un clon o como los quieran llamar.

Yo compré un Nano v3.0 y es Funduino. Hasta ahora, para las cosas que lo usé me funciona muy bien.

yo tengo un fundino duemilanove y hasta ahora es absolutamente igual

Yo tengo un original y un funduino y sin problemas.

Hace unos dias tomé unas lecturas de amperaje en ambos cacharros con este programita

Funduino 17mA
Arduino 22mA

No se estoy metiendo la pata, aún soy bastante novato.

También medí el consumo de un clon del nano y me sorprendió para mal

Nano clon 45mA

Tengo una placa funduino uno pero no me carga los programas me marca estos errores:

avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x77
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x77
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x77
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x77
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x77
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x77
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x77
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x77
avrdude: stk500_recv(): programmer is not responding
Problema subiendo a la placa. Visita http://www.arduino.cc/en/Guide/Troubleshooting#upload para sugerencias.
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x77
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x77

que puedo hacer?

Zephel1203:
Tengo una placa funduino uno pero no me carga los programas me marca estos errores:

avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x77
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x77
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x77
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x77
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x77
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x77
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x77
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x77
avrdude: stk500_recv(): programmer is not responding
Problema subiendo a la placa. Visita http://www.arduino.cc/en/Guide/Troubleshooting#upload para sugerencias.
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x77
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x77

que puedo hacer?

Especifícale al IDE que la placa es un Arduino Uno. Lo que me tiene en duda es:

  • El microcontrolador es el mismo que el especificado en el IDE?
  • El microcontrolador tiene pregrabado el bootloader?

Se dan cuenta que están reflotando un hilo que tiene más de un año sin un post?
Lo cierro, abran uno nuevo.