Need a '1284P version now ...
nice job!
pighixxx:
kf2qd:
Nice use of graphics. What did you use to create this?Illustrator and a lot of patience...
I'm also working on diagrams with basic connections for Arduino Uno at this link.
Wow, that is amazing work, should be very handy for beginners.
Thanks. My kit is en-route and these will come in handy.
Thanks to all!
I'm working now on Arduino MEGA 2560 pinout
Stay tuned.
Wow! Awesome job and THANKS! - Scotty
The AtMega1284p version is out.
Files on first post.
and the ATMega644p
and it's all for today ... XD
Couple comments -
Missing INT2 on PB2
Arduino pinout- can you add the alternate Bobuino Pinout? I think its more useful
// ATMEL ATMEGA1284P on Bobuino
//
// +---\/---+
// (D 4) PB0 1 | | 40 PA0 (D 21) AI 7
// (D 5) PB1 2 | | 39 PA1 (D 20) AI 6
// INT2 (D 6) PB2 3 | | 38 PA2 (D 19) AI 5
// PWM (D 7) PB3 4 | | 37 PA3 (D 18) AI 4
// PWM/SS (D 10) PB4 5 | | 36 PA4 (D 17) AI 3
// MOSI (D 11) PB5 6 | | 35 PA5 (D 16) AI 2
// PWM/MISO (D 12) PB6 7 | | 34 PA6 (D 15) AI 1
// PWM/SCK (D 13) PB7 8 | | 33 PA7 (D 14) AI 0
// RST 9 | | 32 AREF
// VCC 10 | | 31 GND
// GND 11 | | 30 AVCC
// XTAL2 12 | | 29 PC7 (D 29)
// XTAL1 13 | | 28 PC6 (D 28)
// RX0 (D 0) PD0 14 | | 27 PC5 (D 27) TDI
// TX0 (D 1) PD1 15 | | 26 PC4 (D 26) TDO
// INT0 RX1 (D 2) PD2 16 | | 25 PC3 (D 25) TMS
// INT1 TX1 (D 3) PD3 17 | | 24 PC2 (D 24) TCK
// PWM (D 30) PD4 18 | | 23 PC1 (D 23) SDA
// PWM (D 8) PD5 19 | | 22 PC0 (D 22) SCL
// PWM (D 9) PD6 20 | | 21 PD7 (D 31) PWM
// +--------+
//
When you get to chips that arduino doesn't make an 'offical' board for (644P/1284P,etc) then your chart is going to be the reflection of just one persons or one companies decision on what 'arduino' abstracted pin number to use with which port/pins on the AVR chip in question.
As a minimum your chart should state who's pins_arduino.h file was used in the rendition of the pin outs. Otherwise there could be lots of confusion for some users of these 'non-standard-arduino' AVR chips
Lefty
CrossRoads:
Couple comments -
Missing INT2 on PB2Arduino pinout- can you add the alternate Bobuino Pinout? I think its more useful
INT2 corrected and this is a Bobuino version:
The pdf file is on first post.
retrolefty:
When you get to chips that arduino doesn't make an 'offical' board for (644P/1284P,etc) then your chart is going to be the reflection of just one persons or one companies decision on what 'arduino' abstracted pin number to use with which port/pins on the AVR chip in question.As a minimum your chart should state who's pins_arduino.h file was used in the rendition of the pin outs. Otherwise there could be lots of confusion for some users of these 'non-standard-arduino' AVR chips
Lefty
It 's true. Each person makes their own version. The solution is to create an editable PDF.
I'm working on.
Ok, this is a editable version:
PinOut ATMega1284p - Editable Version
If you like it, I can do a editable version for all processors.
nice work pighixxx - I've got this thread bookmarked!
Any plans of releasing something for the leonardo (atmega32u4)?
yOPERO:
Any plans of releasing something for the leonardo (atmega32u4)?
Yes,
I'm working on.
Thanks, I will be waiting for that one.
I wasn't even a member of this forum, just a constant lurker.
I had to register just so I could say THANK YOU and amazing work.
This will be incredibly useful for someone with such a shoddy memory as I.